ASTM D93 FDT-0201, Open cup flash point and fire point tester

Brand Name:

PRIJATELJ

Broj modela:

FDT-0201

Certifikacija:

CE, ISO, CO

Cijena:

600–2000 USD

Pakiranje Detalji:

Tvrdi karton, standardno izvozno pakiranje

Vrijeme isporuke: (VODEĆI)

30 DANA

Uvjeti plaćanja:

T / T, L / C

Nabava Sposobnost:

50SET/MJESEC

Napajanje

AC 220V ± 10%, 50Hz

The heating device

Heating power from 0 ~ 600W continuously adjustable

Sample heating rate

1 ~ 12 ℃ / min, it can be controlled.

Electric mixing device

(1) 90 ~ 120 r / min for the test step A.

(2) 250 ± 10 rev / min for the test step B.

Standard oil cup

(1) Diameter: 50.7 ~ 50.8 mm.

(2) Depth: 55.7 ~ 56.0 mm.

(3) Test oil capacity groove depth: 33.9 ~ 34.3 mm.

(4) Test oil capacity: about 70 ml.

Termometar

A bar mercury thermometer, in line with GB / T 261-2008 standards.

(1) temperature range -5 ~ 110 ℃, indexing 0.5 ℃.

(2) temperature range of 20 ~ 150 ℃, indexing 1.0 ℃.

(3) temperature range of 90 ~ 370 ℃, dividing 2 ℃.

Paljenje

(1) ignition sources: gas (or other civilian combustible gas, the same below). (2) pilot aperture: 0.8 mm.

Sobna temperatura:

≤35 ℃.

Relativna vlažnost

≤85%.

Ukupna potrošnja energije

Manje od 650 W.

svojstvo

1. the instrument is designed in full compliance with ASTM D93, GB/T261 standards.

2. heating power continuously, stepless adjustable, voltmeter intuitive display power size, advanced, reasonable temperature control.

3. compact structure, stainless steel countertops, easy to clean oil.

4. easy to operate, the test results are accurate, the instrument was a number of measurement units selected as closed flash point detection equipment.