ASTM D4530 FDR-1901 Automatski tester ugljičnih ostataka (mikro metoda)

Automatic trace carbon residue tester is in accordance with GB / T 17144, ISO 10370 and ASTM D4530 technical requirements of petroleum products manufactured automated test equipment. Automatic trace carbon residue tester which measures the range of carbon residue is 0.10% (m / m) ~ 30.0% (m / m). The measurement results of the carbon residue value of more than 0.10% (m / m) of petroleum products of the tester and Conradson Carbon method (GB / T 268) equivalent measurement results.

UPIT

Specifikacija
Konkurentska prednost

Opis:
Automatic trace carbon residue tester is also applicable to the determination of carbon residue of less than 0.10% (m / m), the composition of the distillate petroleum products. For such products, the preparation of 10% (V / V) distillation residue first with GB / T 6536 method, and then use the automatic trace carbon residue tester measured.
Primjena:

1. GB / T 17144, ISO 10370 and ASTM D4530
2. Nafta, energija, kemija, istraživanje, kontrola kvalitete i sveučilište

Tehnički podaci:

Tehnički parametri
Combustion chamber temperature range	Room temperature ~ 500 ℃
Combustion chamber temperature accuracy	500 ℃ ± 2.0 ℃
Set the time error
Raspon podešavanja tlaka	0 kPa (0 kg / cm2) ~ 392 kPa (4kg / cm2)
Flow adjustment range	100 ml / min ~ 1000 ml / min; 150 ml / min and 600 ml / min (automatic switching)
Snaga grijalice	1000W
Način kontrole temperature	Digital temperature controller program

Značajke	1.With the program automatic temperature control, automatic thermostat system
	2.With automatic switching traffic, convenient
	3.Uses one-button operation, the entire testing process can be fully automated
	4. Uses saver, abnormal behavior during the test as well as ultra-high temperature in the furnace after the instrument will automatically stop and alarm
	5.Uses a stainless steel airway exhaust gas emissions, low-carbon, environmentally friendly
	6.Using the hint system, automatic alarm when the end of the experiment

sve kategorije

Proizvodi

KONTAKTIRAJTE NAS

ASTM D4530 FDR-1901 Automatski tester ugljičnih ostataka (mikro metoda)

Kontaktirajte Nas

Vezani proizvodi

Kontaktirajte Nas

Uzmite u kontaktu